December 22, 2024

VIDEO: DIY Roll Up Sides For Greenhouses


How to make simple roll up sides for your greenhouse.
SUB: http://bit.ly/2d7dQgd POPULAR VIDEOS: http://bit.ly/2cmcFLe
↓↓↓↓↓↓↓↓↓ CLICK “SHOW MORE” FOR RESOURCES ↓↓↓↓↓↓↓↓↓↓

Support through Patreon: http://bit.ly/2h050EF

DONATE TO THE SHOW!!
$5 – http://bit.ly/2hJxHUT
$10 – http://bit.ly/2hOFgth
$20 – http://bit.ly/2gPJrmM
Donate any amount – http://bit.ly/2h0KfKw

UPCOMING 2017 IN-FIELD WORKSHOPS:
www.theurbanfarmer.co/events

Music by Otis McDonald
Theme music by: David Cutter Music – www.davidcuttermusic.co.uk

facebook.com/GreenCityAcres
twitter.com/GreenCityAcres
___
FARM EQUIPMENT I USE:
Quick Cut Greens Harvester: http://bit.ly/1W3nLGb
Knife and Tool Sharpener: http://bit.ly/29DHlos
Jang Seeder: http://goo.gl/XGvJtl
Row Bags: http://goo.gl/eI1CLp
Insect Netting: http://goo.gl/rjyimK
The Coolbot: http://bit.ly/2l6DhEx
___
CAMERA EQUIPMENT I USE:
http://bit.ly/2jXwgmk
Subscribe to our YouTube channel ➤ http://bit.ly/urban-farmer-sub

26 thoughts on “VIDEO: DIY Roll Up Sides For Greenhouses

  1. you are a awesome guy , just brought your book and met a farmer who is also a fan of you and we are setting a plot starting this week , i'm so excited thank you for inspiring me

  2. I understood everything until you actually rolled it up, how did it all go up so easily and even, and how did tying it down with that rope keep it from falling back down, totally confusing, well, for me that is 😛

  3. Curtis, if you cut your wiggle wire in aboat 8" lengths, go down the sides w the shorter pieces, and hook your top layer w that, you skip every 2' and add a " piece of wiggle wire, you can actually have space in between the wiggle wire for air to blow up the lower section, won't have to use a channel that way

  4. Great stuff Curtis. Do you have any anti-billowing rope that you attach to that? We have a inflated plastic prop house and want roll-up sides on it but can't figure out how to get the zigzag string in there. Any ideas?

  5. Instead of getting a custom crank, you can drill a hole in the end of the pipe and slip a rod through as a crank. One less tool to find or find a place for.

  6. Brilliant. I've only used the system where there's a wiggle wire track running along the entire length of the roll up tube. track is about $1 a foot so that's probably a lot more expensive that your little poly pipe plastic clip trick. Is it still holding up well after 3 years? Do you still like this system for your roll up sides?

  7. If you roll it up the other direction, then the water won't get trapped in there and cause mold and mildew. The water will run right over the top and not down inside the roll.

Leave a Reply

Your email address will not be published. Required fields are marked *